AG2196 VoIP Access Gateway

Carrier-class 2U Modular VoIP Access gateway, up to 96 FXS/FXO ports, SIP/MGCP/3GPP/IMS compliant, SNMP/TR069 management.

AG2196 VoIP Getaway offers maximum capacity of 96 FXS lines and/or FXO lines, suitable for carrier and medium enterprise VoIP deployment.

AG2196 bridges legacy telecom terminal equipments, such as telephone, FAX machine, enterprise PBX, etc, into IP based voice network that constructed by the carrier or enterprise itself. When placed at network side connecting with PSTN switch, AG2196 can be use to bring remote VoIP user into PSTN network. For IP based Call Center solution, AG2196 is the idea remote access gateway for the operators. AG2196 adopts modular design, can flexible configure FXS/FXO line capacity and DSP resource to gain best performance to cost ratio.

AG2196 designed with 1U (up to 48 analog lines) or 2U (up to 96 analog lines) high and 19'' wide compact chassis. Full capacity system consumes maximum 125W power, and can be either 110-240V AC or -48V DC input.

 

Intelligent and Rich in Features

AG2196 adopts embedded linux operating system, supports SIP and MGCP. Work as IP-Centrex access terminal, AG2196 offers rich features, such as call transfer, call pick-up, conference, caller ID, fashion ring, fork ring, FAX, Radius call record, 500 routing rule, number translation, PSTN line fail-over on power failure or network interruption, etc. This makes AG2196 suitable for variety application requirement.

 

Easy to Operate and Maintain

AG2196 provides Web-based management GUI, allowing user to configure parameters, upgrade firmware, import and export configuration data, monitor status, and etc. AG2196 also supports remote management standards, such as Auto-provisioning, Telnet, TFTP, SNMPv2, TR069, TR104 and TR106.

 

High Interoperability

AG2196 has performed the interoperability tests with many softswitch and IPPBX from worldwide vendors, including IP-PBX from Microsoft (OCS), Cisco (CallManager), Nortel (CS1000), and softswitch from Huawei, ZTE, Ericson, and etc.

 

Investment Protection

When choosing next generation communication equipment for IP network, cost reduction and investment protection are the main challenges. AG2196 offers best performance to cost ratio. Through software upgrade, new VoIP function and standard can be continuously delivered to customers. The innovative design in AG2196 supports smooth capacity upgrade from 48 lines to 96 lines. This saves customer initial investment, at the same time support feature business grows. 

 

 System Specification

 

System Feature
Hardware Configuration	24-96 ports per system. Flexible configure FXO or FXS line combination in 4-line incremental
Voice Processing	Voice codec: G.711, G.729A, G.723.1, GSM, iLBC Echo cancellation: G.168, 64ms echo tail Dynamic jitter buffer, Voice activity detection (VAD), Packet loss compensation QoS: IP TOS
Call Feature
Calling type	Voice/Fax/Data
IVR voice prompt	FXO port 2-stage dialing
Encryption	RC4 and other encryption scheme for signaling and/or voice
Call handling	Configurable dialing plan, up to 500 routing rules
Fax Processing	T.30, T.38 fax relay
DTMF	RFC 2833, SIP INFO,  Transparent audio
Billing	RADIUS Interface; Polarity Reverse
User Feature	Caller ID, Call forward, Call transfer, Call fork, Hot line, Fashion ring, No disturbing, Speed dialing
Network Function
Security	IP filter, port number changing
NAT	Static, Dynamic, STUN
Protocol	PPPoE, DHCP, DNS, DDNS, 802.1p, TFTP, Telnet
Configuration/Management
WEB GUI	Configuration, firmware upgrade, status monitoring, log downloading
EMS	TR069/TR104/TR106,SNMPv2,Telnet,TFTP,HTTP
Auto Provisioning	Auto configure/upgrade,  Provision server discover, TFTP, FTP, HTTP
Protocol and Standard
Protocol	RFC3261 & supplementary, RFC3435, 3GPP TS 24.228, TS 24.229
Functions	Caller ID (FSK/DTMF), Call progress tone plan (embed 19 countries tone plans, support under defined tone plan)
Hardware
Central Processor	FREESCALE PowerQUICC MPC8247
Digital Signal Processor	TI TMS320VC5509A
System memory	64MB/128MB
Flash Memory	8MB/16MB
LED	Power, System status, Network status, Line status
Ethernet Connector	RJ-45, 10/100 Base-T, Automatic cross-over
FXO/FXS Connector	RJ-45 (4 line pairs follow T568B scheme)
Max. User Line Length	1500 meters
Ring Equivalent Value	5 REN (short distance)
Power supply	100~240V AC, 50/60 Hz, 1A max
Power Consumption	125W max
Dimension (H x W x D)	44 x 440 x 300 mm (1U)   88 x 440 x 300 mm (2U)
Weight (1U)	Net weight: 4.0Kg; Gross weight (include package): 6.4Kg *
Weight (2U)	Net weight: 6.1Kg; Gross weight (include package): 9.8Kg *
Environment Requirement
Operating	Temperature: 0~40 °C; Humidity: 10%~90% (non conducing)
Non Operating	Temperature: -10~60 °C; Humidity: 5%~90% ( non conducing )

 

 

 

 

 

 

Order Information

Part No.	Description
E@se AG2196 24 concurrent	Main control chassis, 2U, 2 10/100M Base-T, 1 RS232 console, 4 line card slots, AC. With 24 concurrent lines DSP.
E@se AG2196 48 concurrent	Main control chassis, 2U, 2 10/100M Base-T, 1 RS232 console, 4 line card slots, AC. With 48 concurrent lines DSP.
E@se AG2196 72 concurrent	Main control chassis, 2U, 2 10/100M Base-T, 1 RS232 console, 4 line card slots, AC. With 72 concurrent lines DSP
E@se AG2196 96 concurrent	Main control chassis, 2U, 2 10/100M Base-T, 1 RS232 console, 4 line card slots, AC. With 96 concurrent lines DSP.
AG2196-24S	Line card of AG2196, 24 ports FXS, 6 RJ45 interfaces
AG2196-24O	Line card of AG2196, 24 ports FXO, 6 RJ45 interfaces
AG2196-16S	Line card of AG2196, 16 ports FXS, 4 RJ45 interfaces
AG2196-16S8O	Line card of AG2196, 16 ports FXS, and 8 ports FXO, 6 RJ45 interfaces
AG2196-16O	Line card of AG2196, 16 ports FXO, 4 RJ45 interfaces
AG2196-12S12O	Line card of AG2196, 12 ports FXS, 12 ports FXO, 6 RJ45 interfaces
AG2196-8S8O	Line card of AG2196, 8 ports FXS, 8 ports FXO, 4 RJ45 interfaces